Merriest Christmas Wishes

Hello crafters!  Yes it is that time again,  time to start sharing Christmas cards!  I just had to start with an angel card too!  For this card, I started by embossing a piece of coconut white card with the Falling Snow embossing folder.  Next I cut the Mosaic Ray Background out of white card.  I used a sticky adhesive sheet on to another piece of white card, peeled the backing off and attached the Mosaic Ray Backround to it.  I pulled out the Holographic Glitters to fill in the background.  I used Midnight Blue, Teal Have and Sea Spray and I started around the centre circle area in the die then roughly sprinkled them in a circle starting with the dark blue, then the teal and then the sea spray at the bottom.  I cut a circular frame using the Double Stitched Circles die set and added it with foam over the background.  I trimmed away the excess around the edge of the circle then added it to the embossed background with mounting foam.  I cut the Christmas Angel 2020 once out of white card and twice out of silver mirror card.  I used  Distress ink to colour the hair, face and arms of the angel on the base white card.  I cut the dress out of the two silver die cuts.  I added one full dress, then cut the bottom off of the second on and added it one top to give a flowy look to it.  I cut the wings out of vellum and attached them then added the angel to the circular frame with foam.  I cut the Decorative Flag die to give it two forked ends by cutting half way then moving the die around to the other side and cutting it again.  I added one more Decorative Flag in the centre but cut the forked ends off of it so it looked like it was tucked under.  I used the Merrriest Christmas Wishes sentiment cut out of Cobalt Blue card and glued it in the centre.  The card was completed with white mats and layers.  The finished diemnsions are 7 3/4"  x  8 3/4" in size.  All for now. Sue x

                                                     Follow my blog with Bloglovin