Thinking Of You

Hello friends!  I thought I would share a pretty card that showcases the Lattice Edging die set.  I started by using a Pixie Powder background that I had in my stash.  I used Midnight Blue, Purple Violet and Peacock Green for this one.  Since the colour was quite intense it works perfectly with the all white die cuts.  I cut the Lattice Edging die in white into a piece of card top and bottom and attached it over the pixied background.  Next I cut the smaller die from the set twice out of  white and backed them with white.  I glued them into place on the top on bottom inside area of the background.  Next I cut the Phoebe die in white and backed it in white that was cut with a sticky adhesive sheet on it.  I put them together and glittered it with Frosted Sparkle Glitterbitz and mounted it horizontally in the centre of the card with foam.  I stamped my sentiment and cut it out with the inside oval from that set.  I used spray glue on it then added more glitter and mounted it in the centre of the card.  I made a small flower using the leftover bit of the pixied card using the Petite Dianthus die set and mounted it on a white silk ribbon bow (from my stash) and added two leaves.  White on white mats were used to complete the card.  The finished dimensions are 6 1/2" x  7" in size.  All for now, Sue x

                                                      Follow my blog with Bloglovin